In this paper, nonlinear analytical solution of pressurized thick cylindrical shells with variable thickness made of hyperelastic materials is presented. The governing equilibrium equations for the cylindrical shell with variable thickness under non-uniform internal pressure are derived based on first-order shear deformation theory (FSDT). The shell is assumed to be made of isotropic and homoge...

In this study, nonlinear analysis for thick cylindrical pressure vessels with arbitrary variable thickness made of hyperelastic functionally graded material properties in nearly incompressible state and clamped boundary conditions under non-uniform pressure loading is presented. Thickness and pressure of the shell are considered in axial direction by arbitrary nonlinear profiles. The FG materia...

composite pressure vessel cng made of epoxy – carbon material with nonmetal liner is 60% lighter than aluminum vessel under the same conditions. one of the important parameters in the pressure vessels design is their resistance against impact and prevention of explosion. in this paper, the effects of low velocity impact on composite pressure vessel are investigated using fe analysis. the vessel...

A hyperelastic pressure transducer is fabricated by embedding silicone rubber with microchannels of conductive liquid eutectic gallium–indium. Pressing the surface of the elastomer with pressures in the range of 0–100 kPa will deform the cross-section of underlying channels and change their electric resistance by as much as 50%. Microchannels with dimensions as small as 25 μm are obtained with ...

Pressure vessel is a container used to store fluids under pressure and temperature. The fluids can be air, water, chemicals, fuel, gases etc. are most commonly used in food and chemical industries, oil refineries and so on. Pressure vessel is subjected to thermal and structural loads for power plant applications. Since the pressure vessel are subjected to both structural and thermal loads stres...

In this paper, a numerical analysis of stresses and displacements in FGM thick-walled cylindrical pressure vessel under internal pressure has been presented. The elastic modulus is assumed to be varying along the longitude of the pressure vessel with an exponential function continuously. The Poisson’s ratio is assumed to be constant. Whereas most of the previous studies about FGM thick-walled p...

shrink fit process is a useful technique in order to introduce beneficial residual stress in compound pressure vessels. in this paper, the effects of geometrical tolerances on residual stresses have been studied for a compound shrink fitted pressure vessel, practically. three layers, which are designed based on an optimum nominal thickness and overlap dimensions and tolerances, have been fitted...